Solar energy goes with you.
Portable solar panel 200 W · monocrystalline cells · efficiency up to 23.4% · foldable and easy to set up.
Unfold, orient and recharge
The SP200 is easy to carry and unfolds to power a compatible power station while you are on the move.
Capture more light
The advertised conversion efficiency reaches 23.4%. Face the panel toward the sun and avoid shading on its cells to make the most of its 200 W power.
Actual power varies depending on weather, orientation, temperature, and shading.
Kickstands to find the right angle
Unfold the four panels, open the supports and adjust the tilt to place the panel facing the sun. The foldable format then simplifies its storage and transport.
200 W in a transportable format
The SP200 measures 531 × 2400 mm when unfolded and 531 × 640 mm when folded. Its weight as advertised by the European shop is 8.04 kg.
Recharge a compatible station
The MC4 connectors allow the panel to be connected to a power station whose solar input accepts its specifications. The panel does not have a direct USB output.
Designed for outdoor excursions
The ETFE coating protects the cell surface. FOSSiBOT describes the solar face as splash-resistant and advertises an IP67 rating.
FOSSiBOT SP200 in detail
Performance
- Peak power
- 200 W
- Cells
- Monocrystalline silicon, single-sided
- Coating
- ETFE
- Efficiency
- Up to 23.4%
- Voltage at max. power (Vmp)
- 18 V
- Current at max. power (Imp)
- 11.1 A
- Open circuit voltage (Voc)*
- 21.6 V
- Short-circuit current (Isc)
- 13.3 A
Format and use
- Connectors
- Standard MC4
- Weight
- 8.04 kg
- Dimensions unfolded
- 531 × 2400 mm
- Dimensions folded
- 531 × 640 mm
- Number of panels
- 4
- Operating temperature
- −10 °C to 65 °C
- Advertised rating
- IP67 (solar face)
- Advertised warranty
- 2 years
* The FOSSiBOT EU shop states 21.6 V for the open circuit voltage, while the French shop shows 23.4 V. Check the panel label before pairing with any station whose input limit is close to these values.